Microsoft Flight Simulator 2024 There were some server issues on launch day that caused players to get stuck on loading screens. Several updates have been released along with many bug fixes to make the game functional. Players can now take off and gaze at the stunning simulated skies Microsoft Flight Simulator 2024.
After you've spent some time flying and getting used to the controls, why not bring your plane in for a soft landing? Landing a plane is much more difficult than taking off. Microsoft Flight Simulator 2024 The intense simulation physics and gameplay can make landing a harrowing experience if you are not prepared. This guide explains the basics of landing on the runway and ending your flights smoothly.

related
Microsoft Flight Simulator 2024: How to enter third person mode
Microsoft Flight Simulator 2024 lets you walk around in third-person mode, much like a GTA game for airplanes – here's what you need to know.
Overview
Microsoft Flight Simulator 2024 Career Mode has a robust set of tutorials and challenges that can get you comfortable with the basics. This guide breaks down the landing sequence into three separate steps. These would be approach, air deceleration and ground braking. Each step is an important part of smooth landings. Follow these helpful tips to make landing at and within airports more comfortable Microsoft Flight Simulator 2024.
approach
The first stage of entry for landing is the approach. This is the point when you are still in the air and heading for the runway. You want a clean approach, so give yourself plenty of distance to get your altitude down with a visual on the runway. Line up the plane with the strip you are going to land on. Use the rudder by pressing Q/E or LT/RT for band centrality
Descend gradually and slow down using the yoke. Reduce throttle to cruise to 100 KTAS or below. Press F on keyboard or B on XBOX Controller to do this. Repeatedly adjust your angle down, then center your plane in a smooth motion so it doesn't fall out of the sky. Press forward slash (/) or right on the D-Pad to lower your landing gear.
Deceleration and flaring
Once you've crossed the runway, it's time to start decelerating manually. You have several ways to do this. Fully decelerate by pressing your throttle F or B If your plane has holes for higher speeds, you should do this CTRL+F or RB+B to reduce all the way. You should also adjust your flaps. Press B on PC or Down on the D-Pad to raise the flaps. This will position the flaps on your wings. You can increase your flap angle several times to slow down faster.
The last bit of slowdown is called Flare. When you're right on the runway, Open the nose of your plane up. Hold the nose up while gently touching the rear landing gear. This is the most difficult part of the landing and requires some practice. Don't blow your nose too hard or you'll stall. Make subtle adjustments to raise the nose slightly above the horizon and your landing will become smoother with repetition.
brake
The last stage of landing is braking on the ground. Slowly let the landing gear in front of you hit the tarmac. Then hold the Space Bar button or the X button to brake. Hitting the brakes too quickly can send your plane over the edge, so hold the brakes then release them before applying them again to slow down. After coming to a complete stop, follow ATC instructions to taxi to a stand and terminate your flight.